06-07 Gm Duramax Lbz Lly Edge Evolution - 25002

06-07 Gm Duramax Lbz Lly Evolution Power Levels The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Evolution module. Power gains may vary based on vehicle and geographical location. Level 0: Stock Level 1: 30 Horsepower - 60 Foot Pounds of Torque Level 2: 60 Horsepower - 135 Foot Pounds of Torque Level 3: 85 Horsepower - 185 Foot Pounds of Torque Level 4: 100 Horsepower - 220 Foot Pounds of Torque Advanced Tuning The Edge Evolution Programmer is loaded with Performance Tunes to increase Horsepower, Torque and overall engine efficiency. Along with additional tuning parameters such speedometer correction and adjusting the speed limiter. Performance Testing The Evolution Programmer features advanced hardware that allows you to test your performance parameters. Test your skills with a 1/4 mile performance, 0-60 MPH tests and reaction times with drag strip style tree lighting. Diagnostics Also used as a diagnostic tool, the Evolution Programmer can datalog vital engine information and display alerts and records such as RPM, MPH & EGT. The Evolution Programmer will also allow you to read and clear diagnostic trouble codes. Parameters Monitored The Evolution allows you to view up to 4 PIDs at one time. There are 24 different PIDs to choose from: RPM, MPH. Engine Coolant Temp, Load, Gear, Trans Fluid Temp, Boost Pressure, Mass Air Flow, Intake Air Temp, Desired Fuel Rail Pressure, Actual Fuel Rail Pressure, Output Shaft Speed, Manifold Absolute Pressure, Main Injection Timing, Torque, Batter Voltage, Calculated Fuel Rate, Turbo Vane Position, Intake Air Temperature, Barometric Pressure, Fuel Temperature, Desired Idle, Exhaust Gas Temp.